Regardless of product composition, such as washer with dryer or dryer with dryer, you can easily stack 2 single machines to 1 stack set by changing some parts.
[SINGLE DRYER → STACK UPPER DRYER]
UPPER DRYER REQUIRED PARTS
1. Stacking kit(A900)
2. Top plate(A210)
3. Panel(A110)
4. Extension cable to connect PCB(A601)
5. Frame (A390)
[SINGLE WASHER → STACK LOWER WASHER]
LOWER WASHER REQUIRED PARTS
1. Top plate(A110)
2. Panel(F210)
3. Display PCB(F110)
4. Dispenser(F300)
5. Drawer(F220)
6. Frame body(M410)
7. Inlet hose(F327, F340)
In case of coin type
8. Frame(A390)
[SINGLE DRYER→ STACK LOWER DRYER]
LOWER DRYER REQUIRED PARTS
1. Top plate(A210)
In case of coin type
2. Frame(A390)
3. Panel(A110)
The installation guide highlights important installation checkpoints to consider when setting up our machines.
CHECKING AND CHOOSING THE PROPER LOCATION
Install the washing machine on a solid floor that is strong and rigid enough to support the weight of the washing machine, even when fully
loaded, without flexing or bouncing. If the floor has too much flex, you may need to reinforce it to make it more rigid. If the floor is not solid,
it may cause severe vibration and noise.
UNPACKING AND REMOVING SHIPPING BOLTS(Only Washer)
When removing the washer from the carton base, be sure to remove the foam drum support in the middle of the carton base.
If you must lay the washer down to remove the base packaging materials, always lay it carefully on its side.
DO NOT lay the washer on its front or back.
LEVELING THE WASHING MACHINE
The washer tub of your new washing machine spins at very high speeds. To minimize vibration, noise, and unwanted movement, the floor must be
perfectly level and solid.
UE and dE are frequent errors.
UE appears normally when the load is too small or clothing is tilted and gathered to one side.
It can be solved by opening the door, moving the laundry around in the drum, and then pressing the “START” button.
dE appears normally when the door is not closed firmly, or the door switch assembly is out of order.
It can be solved by closing the door properly or changing the door switch.
Washer
1. Hot – Use for hot washing for heavy fabrics, such as white clothes, table linens, and heavily soiled clothes.
2. Warm – Use for warm washing for heavy fabrics, such as jeans, corduroys, or work clothes.
3. Cold – Use for cold washing for sturdy fabrics, such as casual work.
4. Delicates – Use for cold washing for synthetic fabrics, such as washable knit fabric and no-iron finishes.
※ In case of heater type washer, please refer to cloth care label.
Dryer
1. High Temp – Use this cycle to get high heat for heavy fabrics, such as jeans corduroys or work clothes (High heat).
2. Med Temp – Use for drying sturdy fabrics such as work casual clothes (Medium heat).
3. Low Temp – Use for drying synthetic fabrics, washable knit fabrics and no-iron finishes (Low heat).
4. No Heat – Use for items that require heat-free drying such as plastics or rubber.
Washer(Single)
Step 1. Load clothes and close the door.
Step 2. Open detergent dispenser.
Step 3. Add detergent less than 1/4 Cup(2 Ounces, 50g). “High Efficiency” Liquid detergent is recommended.
Step 4. Insert coin or card.
Step 5. Select cycle and push the “START” button.
Step 6. Unload clothes after the cycle is finished.
Washer(Stack)
Step 1. Load clothes and close the door.
Step 2. Open detergent dispenser.
Step 3. Add detergent less than 1/4 Cup(2 Ounces, 50g). “High Efficiency” Liquid detergent is recommended.
Step 4. Insert coin or card.
Step 5. Select cycle and push the “START” button.
Step 6. Unload clothes after the cycle is finished.
Dryer
Step 1. Clean the lint filter before every use.
Step 2. Load clothes and close the door firmly.
Step 3. Insert coin or card
Step 4. Select cycle and push the “START” button.
Step 5. Unload clothes after the cycle is finished
Washer
Clean the detergent dispenser periodically. Use detergent less than 1/4 cup.
Clean the tub at least twice a month.
Clean the drain filter at least once a month.
Clean the gasket periodically.
Dryer
Clean off lint filter before using the dryer every time.
Clean doo inside of the tub and tub front guide every month.